Jettying (jetty, jutty, from Old French getee, jette) is a building technique used in medieval timber-frame buildings in which an upper floor projects beyond the dimensions of the floor below.
- 1 What is an overhanging floor called?
- 2 What is an overhang of a building called?
- 3 Why do Tudor houses overhang the street?
- 4 What is a cantilever floor?
- 5 What is a cantilevered house?
- 6 What is the overhang of a house?
- 7 What is the decorative top of a building called?
- 8 What is the decorative band around a building called?
- 9 What is a jetty on a house?
- 10 What is a garrison style house?
- 11 What is a Tudor jetty?
- 12 Where did half timbered houses originate?
- 13 Why do buildings have overhangs?
- 14 What are Tudor houses made of?
What is an overhanging floor called?
Traditionally, jettying was the art of creating overhangs as seen in timber-framed houses of the 14th to 17th centuries. The jetty ( or jettie or jutty; derr. French ‘jeter’ to throw) refers to situations in which the upper floor overhangs the floor below by as much as 1,200mm (although usually around 400mm).
What is an overhang of a building called?
The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building.
Why do Tudor houses overhang the street?
The upper storeys of some Tudor houses were bigger than the ground floor and would overhang (called a jetty). The origins of the jetty are not entirely known but certainly in a town, it would have the effect of enlarging the floor space above whilst giving maiximum street width.
What is a cantilever floor?
A cantilevered floor is a floor that sticks out past the foundation or supporting wall below. It may be a first- or second-story bump-out, a bay window, or a room over an open porch.
What is a cantilevered house?
What are Cantilever Homes? As gravity-defying architectural structures, cantilever homes are quite unique. When we say cantilever, we are referring to any beam built into a wall that has a free end project. Cantilevers provide a clear space underneath the beam without a supporting columns or bracing.
What is the overhang of a house?
An overhanging eave is the edge of a roof, protruding outwards, beyond the side of the building generally to provide weather protection.
What is the decorative top of a building called?
In architecture, a cornice (from the Italian cornice meaning “ledge”) is generally any horizontal decorative moulding that crowns a building or furniture element—for example, the cornice over a door or window, around the top edge of a pedestal, or along the top of an interior wall.
What is the decorative band around a building called?
stringcourse, in architecture, decorative horizontal band on the exterior wall of a building. Such a band, either plain or molded, is usually formed of brick or stone. The stringcourse occurs in virtually every style of Western architecture, from Classical Roman through Anglo-Saxon and Renaissance to modern.
What is a jetty on a house?
A jetty is an upper floor that depends on a cantilever system in which a horizontal beam, the jetty bressummer, supports the wall above and projects forward beyond the floor below (a technique also called oversailing). to shelter the lower walls of the house from the weather.
What is a garrison style house?
A garrison is an architectural style of house, typically two stories with the second story overhanging in the front. The traditional ornamentation is four carved drops (pineapple, strawberry or acorn shape) below the overhang. The second-story windows often are smaller than those on the first floor.
What is a Tudor jetty?
Some Tudor houses had upper storeys bigger than the ground floor. This was called a jetty and it’s when the upper storeys would overhang. The origins of the jetty are not known but in a town it was very useful for enlarging floor space while getting maximum street width.
Where did half timbered houses originate?
Half-timbered construction in the Northern European vernacular building style is characteristic of medieval and early modern Denmark, England, Germany, and parts of France and Switzerland, where timber was in good supply yet stone and associated skills to dress the stonework were in short supply.
Why do buildings have overhangs?
Roof overhangs have several important functions: they can protect exterior doors, windows, and siding from rain; they can shade windows when solar heat gain is undesirable; and they can help keep basements and crawl spaces dry.
What are Tudor houses made of?
Tudor buildings were made from dark wooden timber frames, which were left exposed or on view, and the walls in the Tudor period were filled in with a material called ‘wattle and daub’. Wattle and daub is a method of making walls and buildings that has been popular around the world for more than 6000 years.